Hi,
I tried to connect nucleoF722ZE board (1137) to AWE designer 8.D.1.1 STMicro Edition on windows 10 as a target via usb with no success. I checked the ini file. It seems that there are some settings (pid/vid) and I may have a missing file. I'd be glad if you guide me to solve the issue.
""List of known USB targets to allow UI matching of the target plugged in.
AWEUsbList=1155|407|STM32F407 Discovery;1155|429|STM32F429 Discovery;1155|746|STM32F746 Discovery;1155|496|STM32L496 Discovery;1155|769|STM32F769 Discovery;1155|747|STM32H747 Discovery;1003|25089|Atmel SAMV71 xPlained;8137|685|RT685EVK;1204|4343|Cypress PSOC6""
Best regards,
Ozgur
11:48am
Hi Ozgur,
Audio Weaver hasn't run on the F722ZE before. In order to do so, DSP Concepts would need to provide an AWE Core embedded library built for the target processor and additional work would be required to develop a BSP and integrate the library on the Nucleo board. If you are interested, please contact sales@dspconcepts.com for further discussion.
Thanks,
Michael
5:18am
Hi Michael,
I've contacted to sales@dspconcepts.com and awaiting their response. Thanks for your reply.
Best regards,
Ozgur