STM32F407 connected with Audio Weaver 6.17.05 STMicro but no sound on output.STM32F407 is not working,display "CPU ---%" always.
-- Liang xing
Hi Liang Xing,
In order to pump audio through the STM32F407 board, you need to do two things:
1. Run a layout in Designer. This system can be as simple or as complex as you'd like.
2. Connect to the 'AWE Audio Class' playback device in Windows, and play audio from some source (Spotify, Audacity, Youtube, etc).
If you still don't hear any audio, try adjusting the volume for the 'AWE Audio Class'. See our documentation for more details: 'Audio Weaver Target User's Guide - STM32F4xx Discovery' at www.dspconcepts.com/support.
1.Can not run a layout in Designer.When click Audio Weaver 6.17.05 STMicro's run button,the following error occurred:
You need to create a valid system to run - all the wires between source modules need to be connected and data types and channels need to match. The simplest system to create is just to connect the outputs of the Deinterleave to the inputs of the Interleave module in the default 'NewSystem.awd' that you get at startup.
See the 'Audio Weaver Designer - User's Guide' at www.dspconcepts.com/support for more information on how to use Designer.