I am new to AWE and I have created a really simple AWD file including only two second order filter smoothed and one volume control. If I build and run it after connecting to the SAM V71 via the AWE Server everything works like expected. That is I can hear the music and live changes in the AWE Designer are hearable in real-time, too.
Now I would like to flash this simple preset onto the development board so that it is executed every time after power up. I did not find much about it in the manual and I did not managed to do this so far.
What I tried was to "Generate Target Files..." and to create an AWB file from the AWD file as well as an _ControlInterface.h file (which is also default checked option in the Generate Target Files dialog but I do not know why). And afterwards I went to the Flash Manager of the AWE Server and added the AWB file (of course I checked the "Boot file" checkbox before pressing the Add button). Then I clicked "Format Flash" and waited for some seconds assuming that now the SAM V71 board should be flashed. But after a power cycle or after pressing the reset button the audio output does not play like expected. In fact nothing is hearable unless I rise my headphone gain about 50dB so that I can hear the input music, probably it is a crosstalk signal.
What is wrong with my approach?